Loading... Please wait...

Pixhawk 2 Safety Switch Fix

Posted by Pixhawk Store on

It has been brought to our attention that a few of the safety switches on the first batch of Pixhawk 2 have been wired incorrectly from the factory. A little annoying but the good news is its easy to fix. The issue is the positive and negative on your switch is wired back to front so the LED wont light up as its a diode and wont conduct in reverse polarity. Just remove the heat shrink from the one that works then rewire the supplied switch. Please note even though it is wired incorrectly it will not harm the pixhawk